Ch341ser Driver

Posted By admin  On 15.09.21

  • July 8, 2019
  • 0

CatalogFile.NT = CH341SER.CAT This was downloaded and installed by Windows 10 when I plugged into the ESP8266 ESP-12-x Use Driver Manager to update the driver and force it to use the internet. Wch.cn produced the driver and it has been signed by Microsoft. CH341SER.ZIP: CH340/CH341 USB to serial port Windows driver, includes DLL dynamic library and non-standard baud rate settings and other instructions. Supports 32/64-bit Windows 10/8.1/8/7/VISTA/XP, Server 2016/2012/2008/2003, 2000/ME/98，Microsoft WHQL Certified, supports USB to 3 and 9 wire serial ports.

Clone Arduino & driver chip CH340, CH340G, CH341

Category : RESOURCES

Ch341ser

Ch341ser Driver Windows 7

The CH340/CH341 chip is used by a number of Arduino compatible cards to provide USB connectivity.
Many operating systems do not recognize these chip natively because they lack the drivers and consequently we have an error due to lack of drivers.
The lack of this driver does not allow you to communicate with the hardware platforms and to use the Arduino development software.

No panic, driver installation is very easy!

The driver must be downloaded from the official (Chinese) website.

Ch341ser

Once the unzip of the package has been executed, it is possible to proceed with the update of the driver for the device CH340/CH341 and equivalent (download driver only for your OS):

WINDOWS 32/64bit (version: 3.4 – 2016/09/27)

Ch341ser Driver Install

Drivers in the Windows OS are missing, you need to download and install them.

Ch341ser Driver For Windows 10

Ch341ser Driver

LINUX 32/64bit (version: 1.5 – 2018/03/18)

The drivers are integrated into different Linux distributions. If the device is not recognized, download the Linux CH340/CH341 driver.

Ch341ser Driver Windows 10

MAC OS 32/64bit (version: 1.5 – 2018/07/05)

This driver is for MacOS Sierra/High Sierra. Do not install the drivers for the Mojave, because it seems that the latest versions are equipped with the built CH340/CH341 support.

Installation
• Unplug any CH34* devices.
• Unload the old drivers if running:
• sudo kext unload /Library/Extensions/usbserial.kext
• sudo kext unload /System/Library/Extensions/usb.kext
• Remove the old driver by issuing one of the following commands (depending on your installation):
• sudo rm -rf /System/Library/Extensions/usb.kext
• sudo rm -rf /Library/Extensions/usbserial.kext
• Double-click on the CH34x_Install_V1.3.pkg file and install (no need to reboot)
• Instead of rebooting, you can force quit Installer after it completes.
• Load the new driver:
• sudo kextload /Library/Extensions/usbserial.kext
• Plug in your device. It should now be listed under the /dev directory. Examples:
• /dev/cu.wchusbserial1410
• /dev/cu.wchusbserial1420

ANDROID (version: 1.5 – 2018/03/18)

Ch341ser Driver

Enjoy!